hit tracker

How Many Amps Does a Smart TV Use?

Compared to all other electronic appliances in your home, your smart TV set serves you the best! It consumes a lot of energy, unlike the microwave and the air conditioner.

Such heavy electricity-consuming devices normally draw much more electrical power, up to 16 amp per hour.

“While your smart companion, the smart TV only takes 1.0 amp an hour. The power company later converts it into kilowatts per hour (kWh). It is when it calculates your monthly bill.

Much amps power consumption depends on a few factors, such as the efficiency rating, technology used, screen design, and age.”

What amperes are, how to calculate the Amperage your smart TV uses, which TV uses the least amount of amperes, and more will be covered in this article.

Amps ーAn Overview

We now live around various gadgets and multimedia devices. These machines have become an essential part of our lives, especially TVs, CD or DVD players, etc. All these devices run on certain Amps.

“Amps are short for ampere. An ampere is the base unit for electrical current in the International System of Units (SI).”

To explain a bit more, Amperes are the electricity companies’ standard measuring units to define electricity use. It is basically one unit of stable current. Amperage is another relevant term that indicates the strength of the current.

To calculate the electricity consumption, we use Amps.

You must be a house owner or a businessman leading a team. You need to know what amount of power your smart TV gadget consumes hourly in both cases.

It will give you a fair idea about its usability and costs. So you can make estimations on your budget.

Factors Affecting the Power Consumption of a Smart TV

As mentioned earlier, different factors affect the amount of power a smart television set uses.

The primary factor is the screen technology of the TV, as most of the television’s work depends on the main screen.

Other factors influencing the number of amperes a TV consumes are:

  • Brightness
  • Contrast
  • Backlight
  • Display size
  • Volume
  • Integration
  • Capability

Generally, a TV having a 50-inches size will need around 200 power watts.

If your TV is connected to 120V, you’ll need up to 1.6 Amps of energy. Obviously, the higher the voltage used by a TV, the lower its amps requirement will be.

A Simple Guide to Calculate Amps Your Smart TV Uses

Most modern TVs consume fewer than 250 watts an hour usually.

The calculations may vary from model to model.

Do you want to know the smart television use of electricity per hour?

You might be planning to buy one for your home? Let’s find out more.

There is an easy, easy way to get a close estimation of your smart TV amps usage per hour. You’ll need to convert watts into amps.

The smart TV’s wattage and voltage show up on its back or energy guide label. It is basically power consumption or energy usage.

  1. See the wattage and volts at the back of the TV.
  2. Divide the number of watts by the number of volts.
  3. You will get the result that will show you the total amount of amperes your device needs to run according to the number of hours.

The formula for calculating amperes looks like this:

I = P / E

Note: I stands for amps, P stands for watts, and E stands for volts.

The Energy-Saving Smart Televisions

On average, TV viewers (adults) in the United States spend five hours and four minutes watching TV every day.

But it’s good news that most modern televisions come with far more energy-saving features than the past generations.

Even so, if you are searching for an efficient TV that is both cost-effective and high quality, there are many of them on the market.

Plasma TVs, older style LCD TVs, and LED TVs started emerging in 2016. Plasma televisions take more energy than modern TVs. Moreover, larger TVs use more Amperage and watts of energy.

LEDs showed up to be the most efficient at saving cost and energy and are now being accepted as a standard. LCDs and LEDs vary in screen technology, processors, and TV settings.

The average energy use of watts of electricity of different efficient models of television are:

  • A regular flat TV draws 1 amp.
  • A Smart TV draws 1.0 amps an hour. Old Plasma TV uses 1.67 amps.
  • An LCD TV of the same size as Plasma consumes around 0.83 amps.
  • A LED TV use of a 40-inch panel takes up to 0.42 amps.
  • An OLED panel of 40-inch uses 0.6 amps.

Let’s take the example of two Samsung Smart TVs with the same screen size and two different screen technologies that differ in power consumption.

Samsung TU-8,000 UHD LCD 4K Smart TV takes up to 116W. Its maximum capacity is 195W.

While Samsung 65″ Class Q90T QLED 4K Smart TV consumes around 120W normally with a maximum capacity of 295W.

Apply the power formula to find how many amps these two electronic devices use.

  1. TU-8,000 consumes 116 watts of power and 120V. Therefore, I = 116 / 120. The output is 0.97. At its maximum, amps will be I = 195 / 120, equal to 1.63.
  2. Q90T takes up to exactly 1 amp. Besides, its maximum will be a big jump of 2.46.

Note: You should know that the power outlets are generally 120V. America also uses higher voltage outlets, but they are identified by shape. Additionally, you won’t be able to plug your smart TV into them.

How to Reduce the Energy Consumption on Your Smart TV?

Reduce your Smart TV consumption by regularly practicing some helpful techniques. Get help from several settings that came with your energy-efficient TV. The following tips will benefit you:

Set the Contrast

Adjust the screen contrast. Contrast influences the power efficiency rating. In contrast, your maximum electricity draw will be as efficient as can be.

Use the Power-Saving Mode

Use the energy-efficiency setting on the TV. Smart TVs have this useful setting to save you bucks. It lets you switch to a power-saving mode. However, it dims the screen light to a certain level of agitation.

Reduce the Screen Brightness

Use your TV remote control to manually lessen the level of screen brightness. We know that the brighter the screen, the greater the electricity usage.

Look For the Energy Star Label

You must have seen the Energy Star label while buying appliances or a flat-screen TV. The Energy Star label represents that the product is more efficient in energy consumption.

The Government backs this symbol to help you find the ideal TV manufacturers to purchase from. It ensures that your long-run cost calculations are simpler to make.

Turn off the Power Strip

Power off the TV set when you are not using it. The standby mode or sleep mode also continuously takes energy from the power outlet. Always unplug and power off your TV and other home appliances.

You can always use TV settings in your favor to increase energy efficiency and reduce cost.

Wrapping Up

Television technology only keeps getting better each day. With the advent of Ultra-high-definition TVs, smart technology is fully integrated into many newer TV models.

The average smart TV gets slimmer and lighter every year. Even though today’s televisions are doing more than ever before, they’re still not drawing a lot of electricity.

You have learned in this article about determining the amps of your smart TV, and that’s quite simple. Mostly, your TV’s amps have less energy than one.

Remember that your electric bill will show the power in kWh units, and you can easily convert that number to amperes.

Tags:

We will be happy to hear your thoughts

Leave a reply

Truly Gadgets
Logo